Features

• Industry certificated to meet NSF / ANSI 42 or 401 standard, Swift Green Rx using advance scientific purification process reduces chemicals, including pharmaceuticals, Volatile organic compounds (VOC), Chlorine Taste & Odor (CTO), pesticides, waterborne parasites, lead, Cyst mercury, asbestos, chlorine, and other industrial chemicals.
• Made in the U.S.A using ONLY certified NSF/ ANSI lab tested raw material for its quality & performance. “100% Guarantee for Highest Performance in its class and Capacity in the Industry”. Buy with confidence. Our Raw Material are BPA, Lead, Arsenic-free
• Our mission is to Save Health !! Great alternative to expensive refrigerator branded filters. Does not remove minerals which may be beneficial to health
• 100% satisfaction guarantee; Outstanding quality; Easy filter replacement; DIY, no tools required to replace this water filter. Replace every 3- 6 months for best performance.
• The eco-friendly filter uses coconut shell carbon ( Renewable Resource), the earth’s most powerful natural filter while keeping plastic water bottles out of our landfills water.

TECHNICAL SPECIFICATIONS

• Max. Operating Temperature: 38C/100F
• Min. Operating Temperature: 0.6C/33F
• Max. Working Pressure: 689kPa/100ps
• Min. Working Pressure: 140kPa/20psi
• Capacity VOC: 300 gallons
• Capacity CTO: 2000 gallons
• Flow Rate: 1.9 lpm/0.5 gpm

HOW TO INSTALL swift rx’s SGF-FQSLF Rx

1. Remove the filter canisters from the manifold by rotating the canisters to the left about 1/3 turn.
2. Lightly lubricate the three black o-ring seals in the manifold with clean food grade silicone grease. Silicone grease is available through GE Parts and Services
3. Remove foil on top of new replacement filter canisters.
4. Install the new canisters into the manifold by turning to the right about 1/3 turn until the alignment marks line up and the filter stops
5. Do Not Overtighten
6. The filter will rise up as it is turned.
7. Turn the handle on the faucet to allow trapped air to purge from the system.
8. Check for water leaks around the system.
9. Once water starts to flow out of the faucet, allow the system to run for 4 gallons (approximately 5 minutes) to flush out any harmless carbon fines that may be present
10. Turn off the faucet and check around the system for leaks.
11. Remove the battery tray and replace the battery to reset the timer.

INSTALLATION VIDEO